Online-Access is the gold winner in The Air Conditioning Heating & Refrigeration News 2009 Dealer Design Awards. Online-Access won the gold for their PagePilot E-Commerce System in the Contractor Services & Software category. David Squires, president of Online-Access was delighted with the award.
Online-Access is the first company to introduce a 'plug-n-play' e-commerce solution for HVAC contractor websites.
Jackson Systems was recognized for excellence in product designin the 5th annual Dealer Design Awards Program sponsored by The Air Conditioning Heating & Refrigeration News magazine. The company’s TK-400 Twinning Kitwas the silver award winner in the commercial controls category. The ACHR News is the leading trade magazine in the heating, ventilating, air conditioning, and refrigeration industries.
"The TK-400 Twinning Kit is one of those products that can simplify the job for the contractor when trying to control two systems from the same thermostat", says Tom Jackson, C.E.O of Jackson Systems. With features like heavy-duty relays, large terminal strips, LED indication, the TK-400 is truly a control that was designed with contractor in mind.”
Sometimes zoning applications require multiple dampers in branch runs instead of a couple of dampers mounted in the main trunk line.Jackson Systems’ Retro Damper is designed for retrofit zone control applications where dampers are required in branch runs.Retro Dampers save installation time and are easy to install.Our Retro Dampers are fabricated with heavy gauge steel and come in sizes ranging from 5” through 10”.These dampers are powered by a three wire actuator (powered open / powered closed) with a 34 lb-in torque rating.The actuators are 24VAC with only 3.84VA and 6 second open/close timing.These great features are all wrapped in a 5 year warranty.Each Retro Damper is supplied with a self-adhesive template that is applied to the round section of duct where the damper is to be installed thus making installation quick and easy.The calibrated adjustment screws located on each side of the damper shaft assembly provides minimum open or close adjustments.This low cost retrofit zone control damper makes it easy for any contractor to quickly add zone control to an existing home.Just cut a slot and slide it in.